This is the first in a series of videos demonstrating the ease of use of the Table Top Tamisium Butane Chemical Oil Extractor. This first video in the series will show how simple it is to load a Table Top Tamisium Butane Oil Extractor with butane from a disposable Butane Solvent Canister which will then be used to perform an extraction in the second video in this series. In this series of videos I will show how to fill or load your extractor tank with solvent and then extract lavender oil at room temperature and then recover your solvent. We will touch on other extraction techniques later in a more advanced series where I will show how to use heat and cold or time and pressure to increase or decrease the efficiency of the extractor. It is all possible with one system now. Remember that disposable canisters are not pure butane. When using them to extract with, dont expect to recover all the solvent for reuse. Only when using 99% pure or greater butane can you expect a full recovery of your solvent after extraction of the oil or chemicals you are extracting from the plant. Not sure what the manufacturers of the disposable canisters add to the butane but I am pretty sure it is propane. This system is designed to efficiently recover butane and some other more easily evaporative solvents if you are willing to wait. 650 milliliters of butane will recover in 1 hour or less. Always check for leaks by immersing the extractor under water while under some pressure.